|
General: Flexible delineator posts shall be produced from recycled engineering thermo plastics.
Construction: All delineator posts shall be manufactured in the U.S.A. The posts shall be made with a minimum of 5% post-consumer, engineered recycled thermoplastic, with the total recycled content being greater than 50%. Post will be modified with virgin modifiers, pigments and UV stabilizers for outdoor weather-ability. Posts shall be one color plastic throughout and have a solid plastic profile without fillers.
Length: Post shall be at specified length plus or minus .250" (6.35 mm).
Reflective Sheeting: Shall be of a specified grade and size affixed to the post by the manufacturer.
FG 95 Anchor: The plastic anchor shall meet the same physical properties as delineator posts, shall be 2.0" (50.8 mm) in length, and of sufficient strength so as to resist pull out in multiple high speed impacts. Anchors shall be placed in slots at the bottom tip of posts prior to installation.
FG 96 Steel Anchor: The steel anchor unit shall be a hot rolled rail steel or new billet steel meeting the physical requirements of ASTM A499 and the chemical requirements of ASTM A1.
Recyclable/Returnable: Flexible posts will be recyclable by the manufacturer. Posts that become damaged under normal use will be returned to the manufacturer, reground then reused to make other delineation products. The manufacturer will offer credit toward the next purchase when products are returned. |
Construction: The steel anchor shall be a uniform flanged channel post with nominal weight of 1.12 #/ft. (.418 kg) before holes are punched. Anchors shall be 18" (457.2 mm) in length and have a sufficient number of 3/8" (9.5 mm) diameter holes on 1" (25.38 mm) centers to facilitate attachment of flexible guide posts. Anchors shall be supplied with attachment hardware as recommended by the manufacturer.
Important Notice to Purchaser
The following is made in lieu of all warranties, express or implied, including the implied warranties of merchantability and fitness for purpose: Seller's and manufacturer's only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product for its intended use, and user assumes all risk and liability whatsoever in connection therewith. Neither the manufacturer nor seller shall be liable either in tort or in contract for any loss or damage, direct, incidental, or consequential, arising out of the use or the inability to use the product. |